| Technical Specification :- | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| PARTICULARS | MODELS | ||||||||||
| SMALL | MEDIUM | BIG | |||||||||
| BAMT-01.10 | BAMT-0.2.20 | BAMT-0.3.30 | |||||||||
| Tapping Cast In Steel | 10 MM | 20 MM | 30 MM | ||||||||
| In Cast Iron | 12 MM | 22 MM | 33 MM | ||||||||
| Spindle Travel | 45 MM | 65 MM | 70 MM | ||||||||
| Distance Between Spindle Centre To Column | 200 MM | 250 MM | 280 MM | ||||||||
| Vertical Travel Of Tapping Head | 410 MM | 450 MM | 460 MM | ||||||||
| Column DIA | 59 MM | 79 MM | 88 MM | ||||||||
| Spindle Speed | 400-750-1510 | 157-280-510 | 50-105-216 | ||||||||
|
Motor Rating KW HP |
0.75 1 |
1.1 1.5 |
1.5 2 |
||||||||
| Net Weight | 110 | 220 | 260 | ||||||||
| Tapper In Spindle | May vary from tapper(MT) size to collet system depending on job requirement | ||||||||||
| Base Working Area | 205 x 220 MM | 300 x 340 MM | 330 X 340 MM | ||||||||
| Floor Area Required | 320 x 490 MM | 470 x 610 MM | 470 X 610 | ||||||||
| Standard Tapping Pitches :- | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| IN MM | 0.5,0.6,0.7,0.75,0.8,0.9,1.0,1.25,1.5 | 1.0,1.25,1.5,1.75,1.8 | 1.5,1.75,1.8,2.0,2.5,3.0 | ||||||||
| IN TPI | 18,20,22,24,26,27,28,32,36,40 | 11.5,12,13,14,16,18,20,22 | 9,10,11,12,13,14 | ||||||||
| Minimum No. Of Strokes | 40 | 15 | 8 | ||||||||
© Copyright Bharat Auto Machine Tools | All Rights Reserved | Powered By Dialme
